Short trial

Glossary

The words used in the studio and on this site. Every definition comes with a listening link, so you can hear the word while you read it.

Basics

Timbre
How a sound "sounds" apart from its level and pitch: a snare and a clap can play at the same loudness and still have different timbres. listen →
dB (decibel)
The unit of a level difference. 1 dB is hard to hear, 3 dB is clear, 6 dB is twice the amplitude. On its own it is a ratio between two levels; with a reference (dB SPL, dBFS) it marks an absolute level. listen →
Level (gain)
How loud a channel plays. Most mix decisions start here, and telling "better" from merely "louder" is the underlying skill. listen →
Pan
Where a sound sits between left and right. Centre means it goes equally to both channels. listen → Checked against: Moore, Psychology of Hearing · Sound On Sound, stereo panorama · all sources
Stereo width
How far a sound spreads from the centre. A narrow sound gathers in the middle, a wide one opens outwards — too much can lose parts in mono. listen →
Reference
A released track you like and compare your mix against. It is the fastest way to see where your ear has drifted. listen →
Balance
How loud the elements are relative to each other. Most mixes that sound wrong are a balance problem, not an EQ problem. listen →
Mid / side
Splitting stereo into what both speakers share (mid) and what they differ in (side). Width mostly follows the level of the side relative to the mid. listen →
Signal chain
The order the processors sit in on a channel. Two linear moves can swap freely, but once a compressor, gate or saturator is in there the order can change the sound — how much depends on what the detector hears. listen → Checked against: Anderton, EQ and compression order · Sound On Sound, EQ and compression order · all sources
Interval
The distance between two notes, in semitones or cent (100 cent is one semitone). A step goes to the next note of the scale; a leap skips at least one. listen →
Contour
The shape of a melody: whether each note goes up or down, not by how much. Two new melodies with the same contour can be hard to tell apart; the scale steps make the difference. listen →
Tonic (home note)
The most stable note of a key — where a melody tends to sound finished. In Melody Ear the bass plays it, so you can hear the other notes against it. listen →

Frequency and tone

Frequency (Hz)
How low or high a sound is. 100 Hz is the region of a bass note, 10,000 Hz is the sparkle of a hi-hat. listen →
Low / mid / high
The frequency axis split roughly in three: body and power in the lows, most instruments and the voice in the mids, brightness and air in the highs. listen →
EQ (equaliser)
The tool that raises (boosts) or lowers (cuts) a chosen frequency region. The most used tool in a mix. listen →
Sweep
Moving a narrow boost along the frequency axis to hunt for the spot that bothers you. Use it sparingly: a big narrow boost makes almost any spot sound bad, so cut only what you actually heard before boosting. listen →
Q (bandwidth)
How narrow or wide an EQ move is. A narrow Q takes out one ring, a wide Q moves a whole region. listen →
Shelf
An EQ that raises or lowers EVERYTHING above (or below) a frequency together. A filter removes the end, a shelf shifts the region. listen →
High-pass / low-pass
A high-pass removes the lows (the highs pass), a low-pass removes the highs. Cleaning the bottom of a vocal is a high-pass job. listen →
Resonance (ring)
A narrow band already in the sound that stands out from the rest: the ring of a snare, a bass note blooming in a small room. listen →
Masking
One element partly or fully burying another. It is strongest when two sounds share a region, but a loud low sound can also mask higher ones — and turning the vocal up does not always fix it. listen → Checked against: Wikipedia, Auditory masking · Production Expert, masking · Boris FX, masking · all sources
Tilt
How the energy of a mix is spread from lows to highs overall. "Dark" or "bright" usually comes from this tilt rather than one band. listen →
Mud
Too much energy around 200–400 Hz: the mix sounds thick and blanketed and nothing sits clearly in front. listen →
Sibilance
The sharp "s" and "sh" sounds of a vocal, roughly 4–10 kHz depending on the voice. Pleasant in small amounts, painful in large ones. listen → Checked against: Sound On Sound, de-essing · all sources
Crossover
The frequency where one band ends and the next begins. A multiband compressor and a loudspeaker both use them. listen →

Dynamics

Dynamic range
The distance between the quietest and loudest moments of a piece. Compression narrows that distance. listen →
Transient
The first instant of a sound — the click of a kick's beater, the crack of a snare. Much of a hit's character lives there. listen →
Sustain
The body and tail that follow the first instant. Its length decides whether a sound feels tight or ringing. listen →
Attack
On a compressor: how fast it reacts to a hit — a fast attack catches the first instant, a slow one lets it through. On a transient shaper the attack control usually sets how much the first instant is boosted or reduced. listen →
Release
How long the processor takes to let go. A short release brings the sound back quickly between hits — overdone, you hear pumping. listen →
Ratio
How hard a compressor squeezes what is above the threshold. 2:1 is gentle, 10:1 behaves almost like a limiter. listen →
Threshold
The level at which the processor starts working. Above it for a compressor, below it for a gate. listen →
Gain reduction
How many dB a compressor or limiter is taking off at that moment. It is the number the meter shows. listen →
Compressor
The tool that turns down loud moments, steadying the level and changing the character of each hit. listen →
Limiter
A very fast, high-ratio compressor that stops peaks from going past a set ceiling. Common on a master to gain loudness, but also used on single tracks and buses. listen → Checked against: FabFilter, Pro-L 2 · all sources
Gate
A tool that turns down or mutes whatever falls below its threshold: mic bleed, hum, hiss. listen →
Sidechain / ducking
Feeding a processor's detector with a different signal than the one it processes. Ducking is its best-known use: one element turned down by another's signal, such as the bass dipping whenever the kick hits. listen →
Multiband compression
A compressor that splits the sound into frequency bands and squeezes each one on its own, so a loud bass note does not pull the whole mix down. listen →
De-esser
A compressor whose detector listens only to the sharp "s" region of a vocal; when it gets harsh it turns down either just that region (split-band) or the whole vocal briefly (wideband). listen → Checked against: Sound On Sound, de-essing · Apple, DeEsser · Steinberg, DeEsser · all sources
Makeup gain
The level you add back after compressing so the processed sound is as loud as before. Without it every compressor sounds "worse" simply because it is quieter. listen →

Space and phase

Reverb
A sound reflecting and decaying in a space. It carries much of the sense of distance and size. listen →
Decay (tail / RT60)
How long the reverb takes to fade. A short tail suggests a room, a long one a hall. listen →
Pre-delay
The short gap between the dry sound and the start of the reverb. One common way to keep a vocal up front while still giving it space. listen →
Wet / dry
The balance of processed (wet) and unprocessed (dry) sound. It is what you mean by "how much reverb". listen →
Phase
How two signals carrying the same sound line up in time. When they work against each other the sum gets thinner instead of stronger. listen →
Polarity
Flipping a signal's plus and minus (the Ø button). Often confused with phase: polarity is a button, phase is a timing relationship. listen → Checked against: Sound On Sound, snare polarity · Sonnox, drum phase alignment · all sources
Comb filtering
The regular notches that appear across the spectrum when a sound is summed with a delayed copy of itself. It sounds hollow and metallic. listen →
Mono compatibility
What a mix loses when it is folded to mono. A real test, because many club systems, single-speaker devices and some broadcast chains play it that way. listen → Checked against: Sound On Sound, mono compatibility · Sound On Sound, stereo panorama · all sources
Delay (echo)
A delayed copy of the sound played after the original. As a rule of thumb: if you can count the repeats you are hearing a delay; when they blur into one dense tail it behaves like reverb. listen →
Feedback (repeats)
How much of the delay is fed back into itself. It decides how many repeats you hear before they die away. listen →
Ping-pong
A delay whose repeats alternate left and right. It widens a part without touching the dry sound in the middle. listen →
Fusion threshold (Haas)
Below roughly 30–40 ms for music (as little as ~5 ms for sharp clicks), a delayed copy is usually not heard as a separate echo: it fuses with the original, and the sound seems to come from where the first arrival came from. Panned apart, the copy adds width; summed to mono, it colours the tone (comb filtering). Longer delays start to sound like two events. listen → Checked against: Moore, Psychology of Hearing · Wikipedia, Precedence effect · all sources
Tempo sync
Locking the delay time to the note grid (1/8, 1/16) instead of milliseconds, so the repeats land with the track. listen →

Colour

Saturation
Gentle distortion that adds harmonics, making a sound fuller and more present without turning it up. listen →
Harmonics
The tones at whole-number multiples of a sound's fundamental pitch. Every pitched sound has them, and their balance is much of its timbre; saturation adds new ones (plus intermodulation products), which is where its colour comes from. listen → Checked against: Wikipedia, Harmonic · Daqarta, harmonic distortion · all sources

Loudness and mastering

LUFS
A loudness unit (ITU BS.1770) that approximates how loud the ear finds a sound, using a frequency weighting. Measured over the whole track (integrated) or in short windows; most major streaming services normalise with it or something close to it. listen →
True peak (dBTP)
The peak of the reconstructed waveform, which can sit BETWEEN the samples. A file can read −0.1 dBFS on a sample meter and still go over 0 once played back or encoded to MP3/AAC — which is why streaming services commonly recommend around −1 dBTP (lower for very loud masters). listen →
PLR (peak-to-loudness ratio)
The distance between true peak and loudness. Large means the master still breathes, small means it is crushed. listen → Checked against: MeterPlugs, PLR · iZotope, headroom · all sources
Clipping
Cutting a peak flat at the ceiling. It is a hard distortion, but used with restraint it keeps the punch of a hit. listen →
Normalisation
A streaming service turning tracks down (and on some services up) toward a loudness target. Where it is on, a master pushed louder than the target is turned down: it loses its loudness advantage but keeps the squeeze. listen → Checked against: Spotify, loudness normalization · Production Advice, YouTube · MeterPlugs, Tidal · all sources
Pumping
The level audibly dropping and returning as the gain reduction releases on every beat. Sometimes an effect, often an accident. listen →

Sound design: words for synth sounds

The adjectives sound designers use. Each one is built in Synth Lab with a few knobs; while you listen you see which knobs are turned. Free. All words →

Dark
The highs are turned down, as if the sound came from behind a curtain. One knob: cutoff down. listen →
Bright
The highs are open and forward; clear and shiny. Cutoff up, a little resonance lifts the top. listen →
Warm
Soft, round, full underneath. The wave becomes a saw with its highs filtered away, and a sub is added below. listen →
Thin
No bottom, the sound floats. A high-pass filter removes the lows. listen →
Fat
A full, thick bass. A few slightly detuned voices (unison) and a sub an octave down. In a mix, keep the lowest part of a bass centred (mono). listen →
Harsh
Aggressive, it scratches the ear. A ringing peak around 3 kHz with distortion on top. listen →
Gritty
Rough, sandy, torn. Distortion breaks up the edges of the sound; the notes stay the same. listen →
Metallic
Like a bell or tin; a tone that doesn't sit on the note. A second oscillator at an odd interval (a tritone and a bit) and a narrow band-pass. listen →
Airy
A breathy, whispery texture. A little noise on top of the sound and a slow start. listen →
Glassy
Pure, ringing, fading like a bell. A second sine an octave and a fifth above the first, and a long decay. listen →
Underwater
Muffled, swaying, far away. Closed filter, a slow wobble on the filter, chorus and a long reverb. listen →
Wobbly
The pitch trembles, the sound is unsteady. An LFO moves the pitch up and down quickly (vibrato). listen →
Pumping
The sound breathes on every beat. An LFO opens and closes the level in time with the tempo (a sidechain feel). listen →
Evolving
A living texture that slowly opens and closes. A very slow LFO moves the filter and the sound fades in. listen →
Wide
Spread to both sides, filling the headphones. Detuned unison voices panned left and right, with chorus on top. listen →
Distant
Sitting at the back, far away. Darker, a soft start and a lot of reverb compared with the dry sound. listen →
Wet
Full of echoes but still in front. Delay repeats and reverb; unlike distant, the highs stay. listen →
Punchy
Every note starts like a punch. A very fast attack, a bright start that dies away at once. listen →
Soft
No edges, comes in and leaves slowly. Slow attack, long release, highs slightly down. listen →
Plucky
Short, like a plucked string. Bright at the start of each note, then darkens and fades at once. listen →

The frequencies behind these words vary from source to source; the definitions here sit in the middle of common usage. Sources →